Kuman Capacitive 7" inch Touch Screen TFT LCD Module HDMI 800x480 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB BLACK PC Various Systems SC7B

Key Features:
● Capacitive touch control and has vertical and horizontal image flip function. Image 4:3 / 16:9 display format conversion.
● Operating voltage: 12V 1A power supply current requirements within the above 2A, On board 400mA DC-DC Boost regulator to provide power supply to LCD backlight.
● Support 864 x 480 x 24bit graphics content through SSD1963 controller .It also equips parallel MCU interfaces in different bus width to receive graphics data and command from MCU. Its display interface supports common RAM-less LCD driver of color depth up to 24 bit-perpixel. Warning: All data port voltage can not exceed 3.6V.
● You can use multiple OSD operation commands or potentiometer to adjust the brightness and color.
● Supports BB Black, comes with related images like:Angstrom. and also Supports Banana Pi/Banana Pro,comes with related images like:Lubuntu, Raspbian.We provided CD disk with related driver and souce code to you, If you are unsure about any of the technical issues.please contact us Freely.

Specifications:
● LCD Size : 7.0inch (Diagonal)
● Driver Element : A-Si TFT active matrix
● Display mode : Normally White ,Transmissive
● High Resolution: 1152,000 Dots (800 x 3(RGB) x 480)
● SSD1963 touch panel controller
● Dot pitch : 0.0642(W) X 0.1790(H)mm
● Active Area : 154.08(w)X 85.92(H)
● Module Size : 164.9(w)X100.0(H)x5.7(D)mm
● Surface Treatment : Anti-glare
● Color arrangement : RGB-Stripe
● Interface: Digital
● Blacklight : Highlighted LED lamp backlighting
● TFT Power(pin Name: 3.3V): The power of the screen is 2.8-3.3V; not use 5V, all the Pin's voltage on the module
● Can not be more than 3.3V.
● Backlight power supply (pin Name: 5V): backlight power range is 4.5-7V.
● Interface Type: 16 parallel
● Operating Temperature : -20 ~ +70 degrees centigrade
● Storage Temperature : -30 ~ +80 degrees centigrade

Packing List:
● 7inch HDMI LCD (B) x 1
● HDMI cable x 1
● USB type A plug to micro B plug cable x 1
● RPi screws pack (4pcs) x 1
● DVD × 1

NOTE:
1.Please note Supported update Raspberry Pi 3 2 and RPi 1 Model B B+ BB BLACK supported
2.Power Supply is NOT included.for PI ,do not require power supply
3.There is a sticker on the LCD screen. Please peel off before use.

SC7B 7 inch HDMI LCD(B) Using standard HID protocol, so that you can migrate its to your own systems
With the use of Pi Raspberry, support Raspbian、Ubuntu、Windows 10 IoT Single-Touch, Free drive.
When used as a computer monitor, support 10 / 8.1 / 8 / 7, Five point touch, Free drive